Produse pentru acetonă lustruitor (19)

Protech Fix AC-Therm Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM). Ideal for interventions on walls with mucilage deposits, bacterial phenomena and moulds. Due to its low thermal conductivity, it is particularly suitable for solving mould problems. It can be applied on any plaster (rustic, civil, plaster, dry mortar, plasterboard, concrete, prefabricated, exposed concrete, etc.). Made with special resins and additives it reduces the absorption of the support while allowing the necessary transpiration, uniforms the absorption making the application of the finishing coats easier. It always works in depth, which is why it is the ideal preparation for applying water-based paints or coatings. Adhesion is excellent even on particularly difficult surfaces, thanks to the use of special resins and the presence in the formulation of an adhesion promoter interacting between the support and the product. Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent anti-condensate treatments (painting and protective coatings). Packaging: 14-liter bucket UM: €/l

ACIDO FORMICO 94%

Kativa Alisado Brasileno Straitening Kit (Pre Shampoo 15 ml & Straightening Mask 150ml & Shampoo 30ml & Conditioner 30ml) - (πακέτο θεραπείας κερατίνης για ξανθά μαλλιά)Ισιωτική θεραπεία κερατίνης , ειδικά σχεδιασμένη για ανοιχτόχρωμα μαλλιά. Επαγγελματικό αποτέλεσμα για έως και 12 εβδομάδες. Η ισορροπημένη φόρμουλα του με γλυοξυλικό, κηστıατıκή και αμινοξέα δεν βλάπτει ή μεταβάλλει τη δομή των ινών των μαλλιών και συμπληρώνεται με την ενυδατική δράση του ελαιολάδου και την αντιοξειδωτική δύναμη των Citrus Fruits ώστε να αφήνουν τα μαλλιά ίσια με φυσική κίνηση, μαλακά και λαμπερά.

SUPER NETTOYANT SOLS LISSES 97.8 des ingrédients d’origine naturelle Idéal nettoyages difficiles – Contact alimentaire Nettoyant sols très concentré, idéal pour le nettoyage difficile des sols cimentés, carrelés ou peints. Convient également pour le décapage d’émulsions autolustrantes. Application manuelle ou en autolaveuse. pH > 12. Formulation sur base végétale. 97,8% du total des ingrédients sont d’origine naturelle. Contact alimentaire (arrêté du 19/12/2013). Réf:I536 Conditionnement:Bidon de 5 L – Carton de 4

Ein anaerober Klebstoff besteht aus einer Mischung verschiedener Acrylate, die über einen peroxidischen Härtemechanismus unter Sauerstoffabschluss und Metallkontakt reagieren. Ein anaerober Klebstoff ist einkomponentig und somit einfach zu verarbeiten. Je nach Zusammensetzung sind Klebstoffe mit einer Temperaturstabilität von bis zu 200°C oder auch schlagzähe Kleber verfügbar. Die Viskositäten reichen von kapillar ab 8mPas bis zu thixotrop 50.000 mPas.

Für Anwendungen im technischen Bereich.

Shampooing acide aromatisé, détergent dégraissant et moussant à effet hydratant, facilite le séchage

Composition: Azote 8% + 10% betaines, 18 acides aminés.

Référence GCNOIRPISFIN-1KG

Hergestellt aus wachsfreiem Schellack feinster Qualität, gereinigt und entfärbt (nicht geblichen). Mit dieser füllkräftigen Politur können Sie die schönsten und hochglänzenden Polituren herstellen. Als Streich- und Spritzlack oder für die traditionelle Handpolitur. Artikelnummer: 0001/s

Vitamin C trägt zu einer normalen Funktion des Immunsystems bei und schützt Zellen vor oxidativen Stress. Vitamin C trägt zur Verringerung von Müdigkeit und Ermüdung bei und erhöht die Eisenaufnahme. Inhalt: 115 Tabletten à 600 mg = 70g Wirkstoff: Acerolafruchtpulver (60%) mit 17% natürlichem Vitamin C(V/V) Verzehrsempfehlung: Täglich 2 Tabletten 2 Tabletten enthalten 120 mg an Vitamin C*. (* deckt 150% des empfohlenen Tagesbedarfs lt. NKV). Zutaten: Acerolafruchtpulver (60%) mit 17% natürlichem Vitamin C, Süßungsmittel: Iosmalt, natürliches Himbeeraroma, Trennmittel: Magnesiumsalze von Speisefettsäuren, Füllmittel: Siliciumdioxid.

Enlève l’effet du temps sur le bois. Rafraîchit et éclaircit le bois. CATEGORIES:Extérieur, Menuiserie Amount:1 L

ACIDE ASCORBIQUE EN SEAU DE 1,5 Kg L’acide ascorbique est un acide organique ayant des propriétés antioxydante L’acide ascorbique a les mêmes propriétés que l’ascorbate de sodium L’acide ascorbique est un produit idéal pour la fabrication de la vitamine C liposomale ACIDE ASCORBIQUE EN SEAU DE 1,5 Kg Notre acide ascorbique s'allie parfaitement à notre lécithine de Tournesol pour la conception de la vitamine C liposomale. Notre Acide ascorbique est vendu dans un pot de 1,5 Kg fermé hermétiquement et inviolable État:Nouveau

DESCRIPTION Façacryl est une peinture de dispersion acrylique de haute qualité spécialement conçue pour les façades. Très bonne adhérence sur toutes les surfaces minérales et diverses. Bon pouvoir couvrant, ne jaunit pas, respirant, parfaitement lavable et bon tendu. Rendement (indicatif) : 6-9 m²/L, selon le support Valeurs limites de l’UE pour ce produit (COV) : Cat. A/a : 30 g/L (2010). Ce produit contient moins de 30 g/L de produits COV.

Bain à immersion dissolvant sans acétone. Agiter avant emploi. Référence:IT10/SO0005

Protech AC-P Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events. Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general. For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks. On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. . DILUTION (by volume with drinking water) BRUSH 1st COAT: 15% a crossed coat or two coats 12-24 hours apart 2nd COAT: 10%. ROLLER 1st COAT: 10% 2nd COAT: 10%. SPRAY (through specific equipment) 1st COAT: 15/25% 2nd COAT: 15/25%. To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product. From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted. Pail 14 l

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Protech Balcony WV A solution based on special silane and siloxane resins in aqueous dispersion, being highly penetrating and transparent (colourless) for quickly, effectively and economically waterproof balconies, tiled terraces, concrete roofing, external stairs, and so on, without removing or impacting upon on the existing flooring. It does not change the appearance of the substrate on which it is applied nor alter its original degree of lubricity or breathability to water vapour. Application is swift, without requiring specialised labour or professional equipment. The treated flooring will be usable only 2 hours after application. Applying Protech Balcony WV is quick and easy – simply use a brush on clean and dry surfaces to resolve any seepage problems. The active substance penetrates quickly and deeply into the grouting, any cracks and porous points of the substrate. Upon contact with air, it causes a polymerisation reaction that perfectly and deeply seals and waterproofs every imperfection it encounters. The specific reactive polymerised siloxane molecule is stable over time and does not labilise. In accordance with the data sheet, the effectiveness of the product applied is normally more than 10 years on surfaces not subject to dynamic movements or structural and/or seismic damage. Should any new gaps or cracks appear after the first application of Protech Balcony WV, they can be easily resolved with a second application of the product. Given its intrinsically non-film nature, the product does not suffer damage, tear, crack, detach, deteriorate nor will it yellow over time due to the effects of UV rays (as naturally happens with epoxy and/or polyurethane treatments). The grouting treated with Protech Balcony WV is protected from mould, moss, lichen and other biodeterioration organisms. Rapid waterproofing of balconies, terraces, stairs, tiled surfaces, concrete and natural stone products, without having to demolish the existing flooring. It can also be used on vertical surfaces particularly exposed to weather and atmospheric conditions (tiles, plaster, exposed brick, etc.). The surfaces on which it is applied must be clean, free of stains, loose and crumbly parts, dust, and so on. If there are any joints between the tiles, they must be properly treated with a suitable acidic or alkaline detergent. To this end, we recommend the specific acid detergent Deterg-A, diluted with water at a ratio of 1:4. Rinse off the treated surfaces with running water. Any fragile and crumbly joints that have been removed, must be restored with cementitious putty offering high adhesion and deformability. To this end, we recommend using the specific waterproof and deformable two-component putty Stucco Balcony. Allow for the necessary time to pass (1–2 days) to allow the grouting to dry before applying Protech Balcony WV. The expansion joints that may be present, including those relative to the line connecting the tiled paving and the outer edge beam (normally made of granite or natural stone), will normally have to be sealed with high-elasticity polymeric materials. To this end, we recommend sealing with Protech Flex, supported by the installation of Filtene Fondogiunto and the particular polyurethane Protech Flex Primer. Pour small amounts of the product at a time then spread evenly across the entire surface with a rubberised brush or rubber blade until the substrate is complete impregnated with the waterproofing. Using a long bristle brush or sponge, apply Protech Balcony WV with particular care in the less accessible and most challenging areas (edges, skirting boards, corners, thresholds, hatches, fireplaces, drains, etc.). Allow the product to penetrate for at least 60 minutes. Remove excess product from all treated surfaces using a cloth wet with water. The average product consumption is around 0.15 kilograms/square metre of surface to be waterproofed, varying depending on the absorption of the substrate and the size of any joints. Normally, 1 kilogram of Protech Balcony WV is enough to treat surfaces from 5 to 10 square metres. Approximately 0.15 kilograms of Protech Balcony WV per square metre of surface to be treated – consumption may vary depending on the porosity of the substrate. Packaging: 2-liter can UM: €/l

Débloque et lubrifie les pièces grippées avec une grande efficacité. Compatible avec tous les métaux. Produit particulièrement mouillant. Il pénètre rapidement entre les surfaces oxydées, disperse la rouille, les salissures et les dépôts divers pour libérer les mécanismes corrodés ou coincés. Laisse un film gras très mince formant une barrière protectrice contre l’eau et l’oxygène. Diminue le frottement entre les pièces mécaniques et les plastiques. Une action prolongée permet d’éliminer les traces de rouille, cambouis, goudron, colle, adhésif, résine ou calamine même brûlée. Protège les métaux sans agressivité vis-à-vis des peintures et caoutchoucs. Chasse l’humidité et assure des contacts électriques parfaits. Appliqué au montage, il assure une protection de longue durée en s’opposant à l’accrochage de la rouille sur le métal. Compatible avec tous les métaux et la plupart des plastiques, peintures, etc. Réf:AO773 Conditionnement:Bidon de 5 L – Carton de 4, Fût de 220 L